Previous Issues - Volume 8, 1999

Volume 8, Issue 01, January - February 1999

  1. A Simple Non-Linear Global-Local Finite Element Methodology For Composite Structures
    B. G. Falzon, D. Hitchings and G. A. O. Davies
    Abstract | Full Article (204 Kb)

  2. Failure Mechanisms Of Sisal Fibres In Composites
    S. L. Bai, C. M. L. Wu, Y.-W. Mai, H. M. Zeng and R. K. Y. Li
    Abstract | Full Article (723 Kb)

  3. Application Of The Rapid Frequency Sweep Technique For Delamination Detection In Composite Laminates
    S.H. Diaz Valdes and C. Soutis
    Abstract | Full Article (433 Kb)

  4. DC And AC Conductivity In Polymeric Particulate Composites Of Epoxy Resin And Metal Particles
    G.M. Tsangaris, G.C. Psarras, and E. Manolakaki
    Abstract | Full Article (420 Kb)

  5. On Consolidation Of Powder Impregnated / Sheath Surrounded Thermoplastic Composite Bundles
    F. Haupert, J. Krebs and K. Friedrich
    Abstract | Full Article (436 Kb)

Volume 8, Issue 02, March - April 1999

  1. The Effect Of Water Absorption On Mode I Intterlaminar Fracture Toughness Of Aramid Fibre Reinforced Plastics
    Hideki Sembokuya, Masaki Hojo, and Kiyoshi Kemmochi
    Abstract | Full Article (346 Kb)

  2. An Intensity Based Optical Fibre Sensor For Flexural Damage Detection In Woven Composites
    P. S. Uskokovic, M. Miljkovic, M. Krivokuca, S. S. Puticl and R. Aleksici
    Abstract | Full Article (299 Kb)

  3. Solid Particle Erosion Of Knitted Glass Fabric-Reinforced Poly(Ethylene Terephthalate) Composites
    E. Moos and J. Karger-Kocsis
    Abstract | Full Article (331 Kb)

  4. Knitted Fabric Composite Sheet Forming Simulation Considering Fabric Realignment
    T.C. Lim, M. Fujihara, M. Zako, S. Ramakrishna and H.M. Shang
    Abstract | Full Article (772 Kb)

  5. Sand Erosion Behaviour Of Alumina - Filled Epoxy Resin
    Asep Handaya Saputra, Masatoshi Kubouchi, Ken Tsuda, Kazuyoshi Arai and Nobuo Mitomo
    Abstract | Full Article (372 Kb)

Volume 8, Issue 03 , May - June 1999

  1. Acoustic Emission Studies on Carbon/Phenolic Ablative Composites Using PCD and PCBN Tools
    P.S.Sreejith and R. Krishnamurthy
    Abstract | Full Article (454 Kb)

  2. Thermally Activated Mechanical Composite Switches
    C.A. Mahieux and K.L.Reifsnider
    Abstract | Full Article (399 Kb)

  3. Simulation of Resin Film Infusion Process Using Finite Element/Nodal Control Volume Approach
    Sunil C.Joshi, Xiao-Lin Liu, Y.C. Lam and J.Sheridan
    Abstract | Full Article (445 Kb)

  4. Stretch Forming Analysis of Knitted Fabric Composites
    T.C.Lim, S.Ramakrishna and H.M.Shang
    Abstract | Full Article (258 Kb)

  5. Effect of PIP Cycles on Fracture Behaviour in Unidirectional SiC Fibre-Reinforced SiC Matrix Composite
    H. Kakisawa, Y. Kagawa, M. Takeda, Y. Imai and H. Ichikawa
    Abstract | Full Article (540 Kb)

  6. A New Approach in Utilising Inherent Flaw Model for Tensile Fracture of Composite Laminates with a Circular Hole
    P.K.Govindan Potti, B.Nageswara Rao and V.K.Srivastava
    Abstract | Full Article (948 Kb)

Volume 8, Issue 04, July - August 1999

  1. A Study of Matrix Crack Tip Delaminations and their Influence on Composite Laminate Stiffness
    Maria Kashtalyan and Costas Soutis
    Abstract | Full Article (541 Kb)

  2. Effect of Fibre Bundle Structure on Stretch-Forming Properties of Knitted Fabric Composites
    T.C.Lim, S.Ramakrishna and H.M.Shang
    Abstract | Full Article (494 Kb)

  3. Synthesis of an Aluminium-Zirconia Composite Through Powder Metallurgy and Sol-Gel
    S.Limenez, R.Lima and V.M.Castaρo
    Abstract | Full Article (380 Kb)

  4. Feasibility of Using Embedded Carbon Fibre Array in Composites to Detect Damage
    J.H.Zhao, T.Wang and Y.I.Liu
    Abstract | Full Article (459 Kb)

  5. The Structural Behaviour of Monocoque Fibre Composite Truss Joints
    Matthew F.Humphreys, Gerard Van Erp and Charles H.Tranberg
    Abstract | Full Article (231 Kb)

  6. Optimisation of Hollow Glass Fibres and their Composites
    Martyn Hucker, Ian Bond, Andrew Foreman and Jennifer Hudd
    Abstract | Full Article (482 Kb)

Volume 8, Issue 05, September - October 1999

  1. Application of the Equivalent Constraint Model to Investigate Stiffness Properties of Transversally Cracked and Split FRP Laminates
    Maria Kashtalyan and Costas Soutis
    Abstract | Full Article (577 Kb)

  2. Computational Engineering Homogenisation of Steel Reinforced Concrete Plates
    M.Kaminski
    Abstract | Full Article (120 Kb)

  3. A New Fibre Composite Beam For Civil Engineering Applications
    Gerard M.Van Erp
    Abstract | Full Article (190 Kb)

  4. Improved Inherent Flaw Model For Tensile Fracture of Cracked Composite Laminates
    P.K.Govindan Potti, B.Nageswara Rao and V.K.Srivastava
    Abstract | Full Article (264 Kb)

  5. Natural Vegetable Fibre/Plasticised Natural Vegetable Fibre - A Candidate For Low Cost and Fully Biodegradable Composite
    Xun Lu, Ming Qiu Zhang, Min Zhi Rong, Guang Shi, Gui Cheng Yang and Han Min Zeng
    Abstract | Full Article (281 Kb)

  6. Prediction of the Elastic Tensor of 3D Composites by an Analytical Model
    C.Tallaron and S.Barre
    Abstract | Full Article (476 Kb)

  7. A Constitutive Model for Through-Thickness Reinforcement Bridging a Delamination Crack
    Brian N.Cox
    Abstract | Full Article (368 Kb)

  8. Post-Impact Behaviour of Polymeric Composites and the Effects of Salt Water Aging on Tensile Properties
    D.R.Veazie, S.W.Park and M.Zhou
    Abstract | Full Article (124 Kb)

Volume 8, Issue 06, November - December 1999

  1. Deep Drawing of Plain weft-Knitted Fabric Composites, Part 1: Cup Height Analysis
    T.C.Lim, S.Ramakrishna and H.M.Shang
    Abstract | Full Article (586 Kb)

  2. The Use of Low Pressure Compression in Resin Transfer Moulding to Enhance the Fibre Volume Fraction of Composite Materials
    Scott McGovern and P.-Y. Ben Jar
    Abstract | Full Article (332 Kb)

  3. Development of Knitted Fabric Reinforced Composite Material for Prosthetic Application
    Zheng Ming Huang and S.Ramakrishna
    Abstract | Full Article (351 Kb)

  4. Interfacial Effects on the Mechanical Properties of Glass/Phenolic Composites
    Tohru Morii , Jan Ivens and Ignaas Verpoest
    Abstract | Full Article (507 Kb)

  5. Pultrusion of Micro-Braided GF/PA6 Yarn
    G. Bechtold, M. Sakaguchi, K. Friedrich and H. Hamada
    Abstract | Full Article (559 Kb)

  6. Thermomechanical Behaviour of 2D-SiC/SiC Composites with Nanoscale- Multilayered (PyC/SiC)n Interphases
    S. Bertrand, F. Germain, R. Pailler and J. Lamon
    Abstract | Full Article (637 Kb)

  7. Strengthening and Strain Sensing of Rectangular Concrete Beam Using Com posites and FBG sensors
    Kin-tak Lau, Li-min Zhou and Li Ye
    Abstract | Full Article (925 Kb)

  8. Effects of Fibre Architecture on Deformation During Preform Manufacture
    A.C. Long, B.J. Souter, F. Robitaille and C.D. Rudd
    Abstract | Full Article (1,851 Kb)