Volume 12, Issue 01, January - February 2003

1. Validation of a parametric constant-life model for fatigue-life prediction for carbon-fibre laminates
   B Harris, HE Carroll and AJ Davies
   Abstract Full Article (185 Kb)
   
   
2. In-Situ MMC Production Through VXBY Intermetallics Formation in an Al Matrix
   C. Polyzos, S. Skolianos, H. Lefakis and D.N. Tsipas
   Abstract Full Article (315 Kb)
   
   
3. Fatigue Behaviour of Unidirectional Single-Walled Carbon Nanotube Reinforced Epoxy Composite under Tensile Load
   Y. Ren, F. Li, H. M. Cheng, and K. Liao
   Abstract Full Article (666 Kb)
   
   
4. Study on humidity aging property of adhesive/carbon-carbon composites joints
   C. Wang, Y. D. Huang, G.Y.Zhang
   Abstract Full Article (1,16 Mb)
   
   

Volume 12, Issue 02, March - April 2003

1. The Effect of a Starch Envelope on Fly Ash Particles on the Impact Properties of Filled Epoxy Composites.
   Kishore, N. L. Ravikumar and D. Sunil
   Abstract Full Article (600 Kb)
   
   
2. Two - Dimensional Finite Element Analysis of Composite Patch Repairs using Shell Laminate Elements
   George J Tsamasphyros, George N Kanderakis, Nikos K Furnarakis and Zaira P Marioli-Riga
   Abstract Full Article (241Kb)
   
   
3. Monitoring of Filler Distribution in Resin with an Electromagnetic Wave Transmission Line
   Tomonaga OKABE and Kei URABE
   Abstract Full Article (326 Kb)
   
   
4. Thermoelastic Behaviour of Synthetic Rubber/ Organoclay Nanocomposites at Low Elongations
   V.P. Privalko, S.M. Ponomarenko, E.G. Privalko, F. Schon and W. Gronski
   Abstract Full Article (182 Kb)
   
   

Volume 12, Issue 03 , May - June 2003

1. Bending Failure Characterisation of Laminated Beams with Braided Fabric Reinforcement
   Zheng-Ming Huang, K. Fujihara and S. Ramakrishna
   Abstract Full Article (936 Kb)
   
   
2. Experimental Study to Illustrate Flow Control in Presence of Race Tracking Disturbances in Resin Transfer Moulding
   Jeffrey M. Lawrence, Anthony Mahe, Yeshwanth Rao K. Naveen, and Suresh G. Advani
   Abstract Full Article (450 Kb)
   
   
3. Detection of Local Preform Defects by Gas Flow Method and Statistical Analysis
   Sun K. Kim, Jeremy G. Opperer, Isaac M. Daniel
   Abstract Full Article (789 Kb)
   
   
4. Interpenetrating Vinylester/Epoxy Resins Reinforced by Flax Fibre Mat
   J. S. Szabo, G. Romhany, T. Czigany, and J. Karger-Kocsis
   Abstract Full Article (331 Kb)
   
   

Volume 12, Issue 04, July - August 2003

1. Time-Dependent Interfacial Residual Shear in a Dual-Coated Optical Fibre Induced by Axial Traction
   Y. C. Shiah, H. Y. Yeh, and J. H. Huang
   Abstract Full Article (104 Kb)
   
   
2. Mechanical and Erosion behaviour of Ti47Al-3W/Ti2AlC Composites By Reactive Arc-Melting
   Janakarajan Ramkumar, Atsushi Kakitsuji, S.K. Malhotra, R.Krishnamurthy, H.Mabuchi, H.Tsuda, T.Matsui and Kenji Morii
   Abstract Full Article (4,36 Mb)
   
   
3. A Simple Method for Theoretical Prediction of Fracture Toughness of Multilayered Composites
   R. Ramesh Kumar, P.N. Dileep, S. Renjith and G. Venkateswara Rao
   Abstract Full Article (288 Kb)
   
   
4. COMMUNICATION TO THE EDITOR: Gas flow test of braided preform quality for resin transfer moulding
   Sun K. Kim and Isaac M. Daniel
   Abstract
   
   

Volume 12, Issue 05, September - October 2003

1. On the Low Velocity Impact Response of Laminated Composite Plates Using the p-Version Ritz Method.
   Y.P. Markopoulos and V. Kostopoulos
   Abstract Full Article
   
   
2. Acoustic emission applied to FAILURE analysis of commingled yarn GF/PP com posites in transverse tension and mode I Delamination.
   D. Lariviere, P. Krawczak, C. Tiberi and P. Lucas
   Abstract Full Article
   
   
3. Neat UHMWPE Filament Wound Composites by Crosslinking Compaction.
   Stanislav Ratner, Amotz Weinberg and Gad Marom
   Abstract Full Article
   
   
4. Optical Fibre Flow-Sensor for Composites Manufacturing.
   C.Lekakou, S.Cook, T.W.Ang and G.T.Reed
   Abstract Full Article
   
   

Volume 12, Issue 06, November - December 2003

1. Influence of the Damage Sequence in the Mechanical Strength of a Composite Material of PEI Reinforced with Woven Carbon-Fabric. A Statistical Analysis
   Garcia, M. A., Arguelles, A., Castrillo, M. A., Fernandez-Canteli, A., Vina, J
   Abstract Full Article
   
   
2. The optimisation of flax fibre yarns for the development of high-performance natural fibre composites
   S. Goutianos and T. Peijs
   Abstract Full Article
   
   
3. Strength of Sandwich Panel ‘Cut and Fold’ Joints
   N. Joulia and S.M. Grove
   Abstract Full Article
   
   
4. Percolation and gas sensing behaviours of ternary conductive composites: vapour-grown carbon fibres/carbon black/poly(methyl methacrylate)
   Xian Ming DONG, Zhi Pei QIN, Ruo Wen FU, Ming Qiu ZHANG, Bin ZHANG, Min Zhi RONG
   Abstract Full Article