Volume 14, Issue 01, January - February 2005

1. Mechanical and Crash Behaviour of Sheet Moulding Compound Materials
   Qiang Yuan, Stuart Bateman and Lin Ye
   Abstract Full Article
   
   
2. Preparation of a novel epoxy/SiO2 hybrid coating
   C. H. Zhang, Y. P. Bai, L. X. Liu, Z. Q. Zhang, Q. Y. Li
   Abstract Full Article
   
   
3. Applicability range of the one-parameter ply plasticity model for prediction of the nonlinear response of laminates
   E. Spârnins, J. Andersons, J. Varna
   Abstract Full Article
   
   
4. Tensile Properties of Natural Fibre Reinforced Thermoset Composites
   T. Yamamoto, L. Medina, R. Schledjewski
   Abstract Full Article
   
   

Volume 14, Issue 02, March - April 2005

1. Damage Evaluation of GLARE®4B Under Interlaminar Shear Loading at Different Temperature Conditions.
   Stephan Hinz , Jens Heidemann, Karl Schulte
   Abstract Full Article
   
   
2. Effect of Thermal Shock on Flexural Modulus of Thermally and Cryogenically Conditioned Kevlar/Epoxy Composites.
   B.C.Ray
   Abstract Full Article
   
   
3. A Study of the Effect of Acetylation and Propionylation on the Interface of Natural Fibre Biodegradable Composites
   V. Tserki, C. Panayiotou, and N. E. Zafeiropoulos
   Abstract Full Article
   
   

Volume 14, Issue 03 , May - June 2005

1. Damage Modelling and Simulation of Composite Materials Using Ultrasonic Measurements.
   A. Paipetis, Y. Z. Pappas, D.E. Vlachos and V. Kostopoulos
   Abstract Full Article
   
   
2. Damping Performance of Thermoplastic-Elastomer Interleaved CFRP - Effect of Viscoelasticity of the Inter-laminar films and Stiffness of the Intra-laminar Region.
   Hajime Kishi, Manabu Kuwata, Satoshi Matsuda, Toshihiko Asami and Atsushi Murakami
   Abstract Full Article
   
   
3. Mechanical Properties of SiC Short-Fibre-Reinforced SiC Composites Fabricated by Tape Casting and Hot-Pressing
   Jae-Seol LEE and Toyohiko Yano
   Abstract Full Article
   
   

Volume 14, Issue 04, July - August 2005

1. Finite Element Simulation and Experimental Determination of Residual Stresses After Extrusion Process in Metal Matrix Composites.
   G.Albertini, E.Girardin, A.Giuliani, D.E.Ilie, B.P.O’Donnell, J.P.McGarry and P.E.McHugh
   Abstract Full Article
   
   
2. PIP Preparation of silica Fibre Fabric Reinforced Silicon Nitride-Based Composites using polyhydridomethylsilazane
   Gong-jin Qi, Chang-rui Zhang, Hai-feng Hu and Chang-cheng Zhou
   Abstract Full Article
   
   
3. Effects of Piezoceramic Particle Addition on the Fracture Toughness Behaviour of CF/EP – Composites
   Patrick Rosso, T. Tanimoto and Klaus Friedrich
   Abstract Full Article
   
   

Volume 14, Issue 05, September - October 2005

1. A Novel Adaptive Process Control for Injection Moulding of BMC and CIC Polyester Compounds.
   Eric Lafranche, Laura Cilleruelo, Marc Ryckebusch and Patricia Krawczak
   Abstract Full Article
   
   
2. Studies on Turning of carbon/phenolic ablative composite using PCBN tools.
   P. S. Sreejith and R. Krishnamurthy
   Abstract Full Article
   
   
3. An Energy-Based FEM Technique for Analysing Delamination Development in Fibre-Reinforced Polymers (FRP).
   Chengye Fan, P.-Y. Ben Jar and J.J. Roger Cheng.
   Abstract Full Article
   
   

Volume 14, Issue 06, November - December 2005

1. Structural Health Monitoring of Bonded Composite Joints Using Embedded Chirped Fibre Bragg Gratings.
   J Palaniappan, H Wang, S L Ogin, A Thorne, G T Reed, A D Crocombe and S C Tjin.
   Abstract Full Article
   
   
2. Embrittlement Behaviour and Mechanism of Silica Fibres with Polymer-Derived Silicon Nitride Coatings.
   Gong-jin Qi, Chang-rui Zhang and Hai-feng Hu.
   Abstract Full Article
   
   
3. Influence of Acid Treatment on Dispersion of Carbon Nanotubes in PBO Matrix.
   X. Li, Y.D. Huang.
   Abstract Full Article